nuclear-news

New radiation monitoring dosimeter technology

The way in which radiation workers are monitored is set to change with the introduction of a new and very different type of dosimeter that has just been approved for legal use in New Zealand. 

Instead of waiting months for information about a possible exposure, radiation workers can now plug their dosimeter directly into a USB port of an Internet-connected Windows or Maccomputer and get an instant readout of any dose received.

Exposure information now available for radiation workers http://www.voxy.co.nz/business/exposure-information-now-available-radiation-workers/5/120503, 13 April, 2012 – We tend to think of New Zealand as nuclear-free but the reality is quite different. Radioactive material produced in nuclear reactors in other parts of the world is imported into the country on a near daily basis and thousands of x-ray generations are at work up and down the country. X-rays, gamma rays and radiopharmaceuticals are used extensively in human and animal health and radioactive sources are deployed in a plethora of industrial and research applications.

Human senses cannot detect the presence of ionising radiation and over time the cumulative effects of undetected radiation exposure become a threat to health. This is of particular significance for the thousands of workers whose occupation brings them into close and frequent contact with sources of ionising radiation. New Zealand has regulations setting occupational exposure limits for radiation workers and personal monitoring is generally mandatory to ensure that these limits aren’t exceeded.

At present most radiation workers in New Zealand are monitored using a
piece of photographic film worn inside a plastic holder. After a
wearing period of between one and three months, the film is removed
from the holder and sent away to be developed and a dose estimated by
measuring the change in density (or blackening) of the processed film.
Practical film-badge dosimeter technology emerged from the Manhattan
Project during the Second World War.

The way in which radiation workers are monitored is set to change with the introduction of a new and very different type of dosimeter that has just been approved for legal use in New Zealand. This device is
based on novel direct ion storage technology where a specially
fabricated transistor records the total amount of ionizing radiation
received. Direct ion storage technology is used at the European
Organisation for Nuclear Research (CERN) facility in Switzerland and a
militarised version is used by a number of European NATO member
countries.

The radiation sensitive components of the new dosimeter are packaged
together with interface circuitry into a small and lightweight USB
pen-drive shaped unit. Instead of waiting months for information about
a possible exposure, radiation workers can now plug their dosimeter
directly into a USB port of an Internet-connected Windows or Mac
computer and get an instant readout of any dose received. Dosimeters
can be read on-site as often as needed offering peace of mind and
saving time and hassle sending dosimeters away for processing.

Incident exposures can be investigated immediately minimising further
potential harm.

Based in Christchurch, Radiation Protection Services Limited (RadPro)
provides personal monitoring solutions for individuals at risk of
occupational exposure to sources of ionising radiation. RadPro is an
authorised distributor of Mirion Technologies Dosimetry Services
Division and distributes the instadose direct ion storage dosimeter in
New Zealand.

April 13, 2012 - Posted by Christina Macpherson | New Zealand, technology